Miami, Florida
Rendering Prices in Miami
5 services from $4/sqft
Rendering Prices in Miami
Prices per sq ft exclude sales tax. Standard three-coat stucco system or EIFS finish. Lath and prep charged separately on frame buildings.
| Service | From | Average | Up to |
|---|---|---|---|
Rendering prices in Miami
Rendering Tips for Miami
Miami's hurricane exposure requires stucco systems to comply with Florida Building Code impact resistance requirements.
High humidity in Miami makes mold-resistant additives worthwhile in stucco mixes.
Salt air near the coast accelerates stucco degradation — use elastomeric paint and plan to re-coat every 7–10 years.
Rendering in Miami — What to Know
Substrate check
Confirm your wall substrate — brick, block, AAC, fibre cement or weatherboard — before choosing a render system. Each has different bonding and compatibility requirements.
Climate consideration
Local climate affects render choice. Humid or coastal areas suit silicone or acrylic systems. Heritage zones often require lime render. Always ask your renderer what they recommend for your specific location.
Scaffolding
Scaffolding for double-storey homes is commonly excluded from render quotes. Confirm whether scaffolding is included and who arranges it before comparing quotes side by side.
The Rendering Process — What to Expect in Miami
Quote and Inspection
A renderer inspects the external walls, checks the substrate type, tests existing render adhesion (if applicable), measures the total wall area and identifies any preparation work. Get at least three written quotes that specify the render system, number of coats, preparation scope, colour and finish, and whether scaffolding is included.
Surface Preparation
Walls are cleaned with high-pressure water to remove dirt, loose paint and biological growth. Cracks are filled, loose mortar is repointed, and control joints are installed where needed. A bonding agent is applied to ensure the new render adheres properly. This preparation work is critical and can take a full day on older homes.
Render Application
The render is applied in two or three coats depending on the system. Each coat must cure before the next is applied — timing depends on temperature and humidity. Acrylic systems typically need 24 hours between coats. Cement render may need longer. The final coat determines the texture and finish — smooth, sand, sponge or textured.
Finishing and Curing
After the final coat, the render needs 7–14 days of protected curing time. During this period, avoid painting over it (if cement render), pressure washing near it, or allowing heavy impacts. Acrylic render with integral colour is ready once cured. Cement render will need painting after 4–6 weeks of full curing.
Render Types Compared — Miami
| Type | Best for | Lifespan | Maintenance |
|---|---|---|---|
| Acrylic render | Most residential applications, new builds, renovations | 15–25 years | Low — integral colour, occasional wash |
| Cement render | Budget projects, areas to be painted, fences and retaining walls | 10–20 years | Medium — needs painting every 7–10 years |
| Silicone render | Coastal areas, wet climates, premium finishes | 20–30 years | Very low — self-cleaning, hydrophobic |
| Lime render | Heritage buildings, breathable substrates, stone walls | 20–50 years | Low — self-healing micro-cracks |
| Texture coat | Feature walls, commercial facades, hiding imperfections | 15–20 years | Low-medium — dirt can collect in texture |
Usually Included in a Render Quote
- ✓ Surface cleaning and preparation
- ✓ Bonding agent application
- ✓ Render supply and application (all coats)
- ✓ Corner beads and expansion joints
- ✓ Masking and protection of windows and doors
- ✓ Clean-up and waste disposal
Often Costs Extra
- ✗ Scaffolding for double-storey homes
- ✗ Removal of existing render
- ✗ Brick repair or repointing
- ✗ Painting (if cement render is used)
- ✗ Waterproofing membrane for below-grade walls
- ✗ Crack repair beyond normal preparation
Rendering Prices in Nearby Cities
Rendering in Miami starts from $4/sqft. A full two-coat acrylic render system typically averages $12/sqft. Prices per sq ft exclude sales tax. Standard three-coat stucco system or EIFS finish. Lath and prep charged separately on frame buildings.
Acrylic and cement render are the most widely used systems in Miami. Silicone render is growing in popularity due to its weather resistance and self-cleaning properties. Lime render is used for heritage and breathable substrate applications.
Yes — a fresh render significantly improves street appeal and buyer perception in Miami. It also protects the external wall from moisture and weathering. Most agents cite rendered homes as generating stronger buyer interest in Miami's market.
A single-storey home render in Miami takes approximately 3–5 days. Double-storey projects take 5–8 days including drying time between coats. Small patch repairs are typically completed in a single day.
Rendering needs dry conditions with temperatures above 5°C and below 35°C for proper curing. In Miami, late spring and early autumn are typically ideal — avoiding summer extremes that can cause flash drying and winter cold that slows curing. Rain during the first 24–48 hours after application can ruin a fresh render coat.
Sometimes. If the existing render is sound, well-bonded and in good condition, a new coat can go over the top after proper preparation and bonding agent application. If the existing render is cracking, hollow-sounding when tapped, or delaminating, it must be removed first. Your renderer should do a thorough adhesion test before quoting over existing render.
Cement render is the traditional sand-and-cement mix applied in two coats — it is cheaper but more prone to cracking and requires painting. Acrylic render is a pre-mixed polymer-modified system that is more flexible, crack-resistant and available in integral colours that do not need painting. Acrylic costs more per m² but saves on painting and has a longer maintenance-free lifespan.
Standard residential rendering on your own home does not typically require council approval or a building permit. However, if your home is heritage-listed or in a conservation area, there may be restrictions on render type, colour and finish. Always check with your local council before proceeding if your property has heritage overlays.
Related Services in Miami
Compare prices for other home services in Miami
Plumbing
Miami prices
Electrician
Miami prices
Solar
Miami prices
Cleaning
Miami prices
Roofing
Miami prices
Painting
Miami prices
Landscaping
Miami prices
Pest Control
Miami prices
Fencing
Miami prices
Skip Bins
Miami prices
Removalists
Miami prices
Storage
Miami prices
Carpet Cleaning
Miami prices
Tree Lopping
Miami prices
Waterproofing
Miami prices
Tiling
Miami prices
Plan The Rest Of The Job
Other services in Miami
Compare adjacent project costs in the same market before you book trades, waste removal, or follow-on work.
Skip Hire in Miami
Builders skips, mini skips, and waste removal pricing.
Cleaning in Miami
Domestic, deep-clean, and end-of-tenancy rates.
Electricians in Miami
Call-out fees, rewires, and testing work.
Plumbing in Miami
Emergency call-outs, repairs, and installation pricing.
Roofing in Miami
Roof repairs, replacement, and leak-response costs.
Fencing in Miami
Timber, Colorbond, closeboard, and boundary quotes.
Tree Services in Miami
Tree surgery, removal, and pruning cost guides.
Painting in Miami
Interior, exterior, and full-home painter pricing.
Pest Control in Miami
One-off treatments and ongoing protection plans.
Removalists in Miami
Home moves, packing, and hourly crew costs.
Solar in Miami
System sizing, panels, and install cost benchmarks.
Storage in Miami
Self-storage unit pricing by size and location.
Plan More Work in Miami
Compare nearby cities and related trades before you lock in your next quote.