Sydney, New South Wales
Ducted Vacuuming Prices in Sydney
12 services from $92/job
Last updated March 2026. We benchmark Sydney ducted vacuuming prices against a sample size of roughly 72+ completed and live quote observations, then normalise system size, brand, access difficulty and retrofit complexity.
Ducted Vacuuming Prices in Sydney
Prices include GST. Standard residential installations. New-build rough-in is significantly cheaper than retrofit. Prices vary by brand, number of inlets, pipe run length and access difficulty.
| Service | From | Average | Up to |
|---|---|---|---|
| 🏠New System Install (3-Inlet) Supply and install a complete ducted vacuum system with 3 inlet valves, power unit, pipework and exhaust — suits smaller homes and apartments | $3220/job | $4140/job | $5175/job |
| 🏡New System Install (5-Inlet) Supply and install a complete ducted vacuum system with 5 inlet valves, power unit, pipework and exhaust — suits average 3–4 bedroom homes | $4830/job | $6210/job | $7820/job |
| 🏘️New System Install (7-Inlet) Supply and install a complete ducted vacuum system with 7 inlet valves, power unit, pipework and exhaust — suits larger homes with 4+ bedrooms | $6325/job | $7820/job | $9775/job |
| 🔧Retrofit Existing Home (Per Inlet) Retrofit a ducted vacuum inlet point into an existing home including pipework routing through walls and ceiling — price per inlet, power unit extra | $575/inlet | $736/inlet | $920/inlet |
| ⚡Power Unit Replacement Remove old power unit and install new replacement motor unit — includes electrical connection, pipework coupling and system test | $920/job | $1438/job | $2070/job |
| 🛠️System Service / Maintenance Annual or periodic service of ducted vacuum system including motor check, filter clean/replace, inlet valve inspection and suction test across all points | $173/job | $253/job | $345/job |
| 🔌Inlet Valve Replacement Replace a faulty or damaged inlet valve assembly — includes removal of old valve, fitting new unit and suction test | $138/valve | $207/valve | $288/valve |
| 🔩Pipe Repair / Replacement (Per Metre) Repair or replace damaged ducted vacuum PVC pipework — price per metre including fittings, access may add to cost if concealed in walls or ceiling | $92/m | $126/m | $173/m |
| 🔍Full System Clean & Inspection Comprehensive clean and inspection of entire ducted vacuum system including pipe flush, blockage check, motor assessment and suction performance test | $230/job | $334/job | $460/job |
| 💨Ducted Vacuum to Exhaust Conversion Convert an existing ducted vacuum system to exhaust outside the home rather than recirculating — includes external vent installation and pipework modification | $460/job | $667/job | $920/job |
| 🧹Hose Kit Replacement Supply and fit a new hose kit including flexible hose, handle, floor tool and accessories — price varies by brand and hose length | $230/kit | $391/kit | $575/kit |
| 🔇Muffler / Silencer Installation Install an inline muffler or silencer to reduce operating noise from the ducted vacuum power unit — includes fitting and pipework modification if required | $173/job | $276/job | $402/job |
Ducted Vacuuming Tips for Sydney
Sydney ducted vacuum installers charge 10-20% above national averages due to high labour costs — always get three quotes and confirm whether the price includes the power unit or just installation labour.
Many older Sydney homes have accessible roof spaces ideal for ducted vacuum pipework routing — a roof space inspection before quoting can reveal whether a retrofit is straightforward or complex.
Apartment installations in Sydney require body corporate approval for any wall penetrations — factor in extra lead time for strata approval before scheduling installation.
Ducted Vacuuming in Sydney — What to Know
New build vs retrofit
Installing during construction in Sydney is dramatically cheaper than retrofitting. If you are building or renovating with walls open, always add ducted vacuum rough-in — even if you plan to activate the system later.
External exhaust venting
Always choose a system that exhausts outside in Sydney. External venting removes fine dust particles and allergens from the home entirely — recirculating systems push some particles back into the air.
Annual servicing extends motor life
An annual service ($150–$300) in Sydney extends the power unit motor life from 8–12 years to 15–20 years. The service includes motor check, filter replacement, inlet inspection and suction testing at every point.
What Changes Ducted Vacuuming Prices in Sydney?
System size and inlet count in Sydney
The number of inlets is the primary cost driver for ducted vacuum installation in Sydney. Each inlet adds $500–$800 in a retrofit. A well-positioned 5-inlet system covers most 3–4 bedroom Sydney homes effectively.
Power unit brand and quality
Power unit choice significantly affects the total system cost in Sydney. Entry-level units start around $600–$800, mid-range $900–$1,400 and premium European units $1,500–$2,500+. Higher-end units offer better suction, longer motor life and quieter operation.
Property type and access conditions in Sydney
Homes with accessible roof spaces and wall cavities are the most straightforward to install in Sydney. Slab-on-ground homes, double-brick construction and multi-storey properties add complexity and cost.
New build vs retrofit installation
Installing ducted vacuum during construction in Sydney is dramatically cheaper than retrofitting a finished home. If you have any renovation work planned with walls open, adding ducted vacuum rough-in at that stage saves thousands compared to a standalone retrofit later.
Ducted Vacuuming Prices in Nearby Cities
Ducted vacuuming in Sydney starts from $92/job. A typical 5-inlet new system install costs $6210/job. Prices include GST. Standard residential installations. New-build rough-in is significantly cheaper than retrofit. Prices vary by brand, number of inlets, pipe run length and access difficulty.
Ducted vacuuming services in Sydney include New System Install (3-Inlet), New System Install (5-Inlet), New System Install (7-Inlet), Retrofit Existing Home (Per Inlet) and more. Both new installations and service/repair work are available.
Yes. Most Sydney homes can be retrofitted with a ducted vacuum system. Retrofit costs $500–$800 per inlet point plus the power unit. Homes with accessible roof spaces, wall cavities or subfloor areas are the easiest to retrofit. A site assessment will confirm the best approach for your property.
Most 3–4 bedroom homes in Sydney need 4–5 inlet points for full coverage. Each inlet covers approximately 50–60 square metres with a standard 9-metre hose. An installer can assess your floor plan and recommend optimal placement.
A standard Sydney ducted vacuum quote includes the power unit, all pipework, inlet valves, external exhaust vent, wiring and system testing. Hose kits, hide-a-hose upgrades and wall patching are commonly quoted as extras.
A new ducted vacuum installation in Sydney takes 1–2 days depending on the number of inlets and access difficulty. Power unit replacements take 1–2 hours. Annual servicing takes about 1 hour.
The best time is during new home construction or a major renovation when walls are open. For standalone retrofits in Sydney, spring and summer offer the best trade availability and scheduling flexibility.
Confirm the installer has experience with your property type, ask whether the quote includes the hose kit or just the installed system, verify the power unit brand and warranty terms, and get a written quote specifying the number of inlets, pipe routing and what is included versus extra.
How We Get These Prices for Sydney
Last updated March 2026. We review completed ducted vacuuming quotes, compare them with nearby-city ranges, and normalise system size, brand, access difficulty and retrofit complexity so this page stays useful for real Sydney quote comparisons.