Bath Resurfacing Prices
$120–$800
Typical range · Updated March 2026
Real pricing for bath reglazing, acrylic liners, chip repair, non-slip coatings and cast iron restoration across Australia, UK, USA, Canada and New Zealand.
Choose Your Country
Select a country to see detailed bath resurfacing pricing by city
Australia
bath resurfacing & reglazing
From $120/job
12 service types · 8 cities with data
8 regions covered
View Australia prices →
United Kingdom
bath resurfacing & re-enamelling
From £84/job
12 service types · 6 cities with data
4 regions covered
View United Kingdom prices →
United States
bathtub refinishing & reglazing
From $96/job
12 service types · 6 cities with data
12 regions covered
View United States prices →
Canada
bathtub refinishing & reglazing
From C$108/job
12 service types · 5 cities with data
6 regions covered
View Canada prices →
New Zealand
bath resurfacing & reglazing
From NZ$114/job
12 service types · 5 cities with data
5 regions covered
View New Zealand prices →
Bath Resurfacing Prices by Service — Australia
National average prices including GST — standard residential bathrooms
| Service | From | Average | Up to |
|---|---|---|---|
| 🛁Bath Resurfacing Standard enamel resurfacing of a bathtub — strip, repair and recoat the existing surface with a durable new finish | $350/job | $480/job | $650/job |
| ✨Bath Reglazing Spray-on enamel recoating of a bathtub — a fast, cost-effective way to restore the gloss finish on a worn bath | $300/job | $400/job | $550/job |
| 🚿Acrylic Bath Liner Custom-moulded acrylic liner fitted over the existing bath — a long-lasting alternative to resurfacing that covers the old surface completely | $800/job | $1200/job | $1800/job |
| 🩹Chip & Scratch Repair Repair enamel chips, scratches and minor damage on bathtub surfaces — colour-matched fill and polish | $120/job | $220/job | $350/job |
| 🦶Non-Slip Coating Apply anti-slip coating to the base of a bathtub or shower — textured finish for improved safety | $150/job | $240/job | $350/job |
| 🎨Bath Colour Change Change the colour of your bathtub via resurfacing — strip the old finish and apply a new colour to refresh the bathroom look | $400/job | $530/job | $700/job |
| 💧Spa Bath Resurfacing Resurface a spa or jet bath — includes masking and protecting jets and fittings during the resurfacing process | $500/job | $680/job | $900/job |
| 🚿Shower Base Resurfacing Resurface a shower tray or base — repair cracks, chips and worn surfaces with a durable new coating | $300/job | $400/job | $550/job |
| 🧱Tile Resurfacing Resurface bathroom wall or floor tiles surrounding the bathtub — recoat over existing tiles without removal | $400/job | $580/job | $800/job |
| 🛠️Full Bath Replacement Remove the old bath and install a new bathtub — includes plumbing disconnection, removal, new bath supply and connection | $1500/job | $2500/job | $4000/job |
| 🏛️Cast Iron Restoration Restore a heritage cast iron bathtub — strip back to bare metal, repair rust and re-enamel for a factory-quality finish | $600/job | $850/job | $1200/job |
| 📎Bath + Tile Combo Resurface the bathtub and surrounding wall tiles together — a cost-effective bathroom refresh without a full renovation | $650/job | $900/job | $1200/job |
Prices include GST. Based on verified specialist data. Last updated March 2026.
Common Bath Resurfacing Jobs and What They Usually Cost
Real job costs for typical Australian bathrooms — complete project pricing, not just service rates.
| Job | Typical scope | Typical price | On-site time |
|---|---|---|---|
| Standard bath resurfacing (acrylic or steel) | Strip, prepare and recoat a standard-size acrylic or pressed steel bath with a two-part epoxy finish | $350–$650 | 3–5 hours |
| Bath reglazing (spray-on refresh) | Clean, prepare and spray a single-component enamel recoat over a lightly worn bath — fastest option | $300–$550 | 2–3 hours |
| Cast iron bath restoration | Strip a heritage cast iron bath to bare metal, repair rust, fill imperfections and apply a premium enamel finish | $600–$1,200 | 1–2 days |
| Bath + tile combo resurface | Resurface the bath and surrounding wall tiles together — complete bathroom refresh without renovation | $650–$1,200 | Full day |
| Acrylic bath liner installation | Measure, fabricate and install a custom acrylic liner over the existing bath — no demolition required | $800–$1,800 | Half day |
| Full bath replacement | Disconnect plumbing, remove old bath, install new bath, reconnect plumbing and seal — complete replacement | $1,500–$4,000 | 1–2 days |
What Affects Bath Resurfacing Prices?
Five key variables that explain why two similar bath resurfacing quotes can differ significantly.
Bath material and condition
The material of your existing bath is the biggest cost variable. Acrylic and fibreglass baths are the simplest and cheapest to resurface. Pressed steel (enamel-on-steel) baths are straightforward but may need rust repair. Cast iron baths require specialist stripping and preparation — particularly if the original enamel has heavily deteriorated. A bath in poor condition with extensive rust, chips or previous failed resurfacing will cost more to prepare than a bath with minor surface wear.
Coating system and finish quality
Entry-level spray-on reglazing uses a single-component enamel that is fast to apply but typically lasts 3-5 years. Mid-range two-part epoxy systems provide a harder, more durable finish lasting 5-8 years. Premium polyurethane and isocyanate coatings deliver the most durable factory-quality finish lasting 8-15 years. The coating system directly affects both the cost and the longevity of the resurfacing — always ask what product system is being used.
Scope of work — bath only vs bath and tiles
Resurfacing the bath alone is the base price. Adding surrounding wall tiles increases the scope, preparation time and material cost. A bath-and-tile combo package is significantly cheaper than doing each separately. Full bathroom resurfacing (bath, tiles, shower base) is the most comprehensive option and offers the best value per square metre of surface covered.
Access, location and ventilation
Ground-floor bathrooms with good ventilation are the simplest jobs. Apartments and upper floors may require additional ventilation equipment. Bathrooms with poor natural ventilation require extraction fans or temporary exhaust systems during the coating and curing process. Travel distance from the specialist to the property may add to the cost in regional areas.
Additional services — non-slip, colour change, chip repair
Adding a non-slip coating to the bath base typically adds $150-$350. Changing the bath colour (rather than matching the original) adds $50-$150 for colour matching and extra preparation. Chip and scratch repair as part of a full resurface is usually included, but standalone chip repair is a separate service with its own pricing.
Bath Resurfacing Materials Compared
Different coating systems and resurfacing methods — understanding them helps when reviewing quotes.
| Material | Application | Lifespan | Best for |
|---|---|---|---|
| Two-part epoxy enamel | Standard bath resurfacing — acrylic, steel and fibreglass baths | 5–8 years | Most residential bath resurfacing jobs — best balance of cost, durability and finish quality |
| Acrylic liner (insert) | Overlay a custom-moulded acrylic shell over the existing bath | 15–20 years | Homeowners wanting maximum longevity without full bath replacement — particularly suited to standard-size baths |
| Polyurethane coating | Premium bath and tile resurfacing — all bath types | 8–15 years | Premium resurfacing, cast iron restoration and high-use bathrooms where maximum longevity is the priority |
| Porcelain enamel (factory re-enamel) | Cast iron bath restoration — bath removed and kiln-fired | 20–30+ years | Heritage cast iron bath restoration where an authentic factory-quality finish and maximum longevity are required |
What Is Included in a Bath Resurfacing Quote?
Typically included
- ✓Surface preparation including cleaning, sanding, etching and priming of the existing bath surface
- ✓Application of the resurfacing coating system (epoxy, polyurethane or enamel as specified)
- ✓Masking and protection of all surrounding surfaces, taps, waste fittings and overflow during resurfacing
- ✓Minor chip and scratch repair as part of the surface preparation process
- ✓Clean-up of the work area and removal of all masking and protective materials after completion
Commonly quoted as extras
- +Non-slip coating applied to the bath base — typically $150–$350 extra depending on bath size
- +Colour change from the original bath colour — adds $50–$150 for colour matching and extra preparation
- +Surrounding tile resurfacing — typically $400–$800 extra depending on tile area
- +Replacement of waste fitting, overflow or tap ware if existing fittings are damaged or corroded
How a Bath Resurfacing Job Progresses
Understanding the four stages helps set clear expectations before work begins.
1. Assessment and preparation
The specialist inspects the bath condition, identifies the material type (acrylic, steel, cast iron, fibreglass), assesses any damage (chips, cracks, rust, previous coatings) and recommends the most appropriate resurfacing system. The surrounding area is masked and protected. Taps, waste fittings and overflow are masked or removed.
2. Surface stripping and repair
The existing surface is stripped, sanded and etched to create a clean bonding surface for the new coating. Chips, cracks and rust spots are filled and repaired. For cast iron baths, this stage is the most intensive — deep rust may require grinding and specialist filler. The quality of surface preparation directly determines the longevity of the final finish.
3. Coating application
The resurfacing coating is applied — typically 2-4 coats of epoxy or polyurethane, each allowed to flash off before the next coat. Professional application uses spray equipment for an even, factory-quality finish. Dust, temperature and humidity are controlled during application. The entire process typically takes 3-5 hours for a standard bath.
4. Curing, inspection and handover
The coating cures for 24-48 hours before the bath can be used. The specialist removes masking, inspects the finish and provides care instructions. Proper curing is critical — using the bath before the coating has fully hardened will damage the finish. Most specialists provide a written warranty (typically 5-10 years) covering coating adhesion and finish quality.
How to Get Better Value on Bath Resurfacing
Resurface instead of replacing
A standard bath resurfacing ($350–$650) is a fraction of the cost of full bath replacement ($1,500–$4,000). Unless the bath is structurally damaged (cracked through, rusted through on steel baths, or the wrong size), resurfacing delivers a like-new finish at 15-25% of the replacement cost. Always get a resurfacing quote before committing to replacement.
Bundle the bath and tiles together
If both the bath and surrounding tiles need attention, a combined bath-and-tile resurface ($650–$1,200) is significantly cheaper than doing each separately. Most specialists offer combo pricing that saves 15-25% over separate jobs. The combined job also ensures a consistent colour match between the bath and tile finish.
Fix chips early before they spread
A small enamel chip ($120–$350 to repair) can be fixed quickly and cost-effectively. Left unrepaired, chips expose the substrate to water, leading to rust (on steel and cast iron) or delamination (on acrylic). Early chip repair prevents the need for a full resurface and extends the life of the existing finish by years.
Maintain the resurfaced finish properly
After resurfacing, use only non-abrasive bathroom cleaners — avoid bleach, scouring pads and harsh chemicals. Rinse the bath after each use and keep the bathroom well ventilated. Proper maintenance extends a resurfaced finish from the minimum 5 years to 8-15 years, dramatically improving the cost-per-year value of the investment.
Get a quote
Fill in your details and copy the template — then paste it into an email to any provider.
Hi, I'm looking for a quote for Bath Resurfacing in [your suburb]. I've seen typical prices around $120–$1,800 — please let me know if your quote is in that range. Please reply to this email or call me to discuss. Thanks, [your name]
Find providers on hipages, Airtasker, or Google “Bath Resurfacing near me” to get their email.
Bath resurfacing costs in Australia range from $120 for a chip repair to $4,000 for a full bath replacement. A standard bath resurface typically costs $350–$650. Bath reglazing costs $300–$550. An acrylic liner costs $800–$1,800. Cast iron restoration costs $600–$1,200. Prices vary by bath material, condition, coating system and location.
A professionally resurfaced bath typically lasts 5–15 years depending on the coating system used and how well it is maintained. Entry-level spray-on reglazing lasts 3–5 years. Two-part epoxy systems last 5–8 years. Premium polyurethane coatings last 8–15 years. An acrylic liner lasts 15–20 years. Proper maintenance — non-abrasive cleaners, good ventilation, and avoiding harsh chemicals — significantly extends the life of any resurfaced finish.
Bath resurfacing is better than replacement in most situations. Resurfacing costs $350–$650 compared to $1,500–$4,000 for full replacement. It takes 3–5 hours versus 1–2 days. It avoids plumbing disconnection, tile damage and waste disposal. Resurfacing is not suitable when the bath is structurally damaged (cracked through, rusted through) or when the bath size needs to change. For a bath with surface wear, staining, chips or an outdated colour, resurfacing delivers a like-new finish at a fraction of the replacement cost.
Yes — professional bath resurfacing works on acrylic, fibreglass, pressed steel (enamel-on-steel), cast iron and porcelain baths. Each material requires different preparation and coating systems. Acrylic and fibreglass are the simplest to resurface. Steel baths may need rust repair. Cast iron baths require the most intensive preparation but deliver excellent results. Baths that have been previously resurfaced can usually be resurfaced again, though the old coating must be fully stripped first.
Most resurfaced baths can be used 24–48 hours after the coating is applied. The exact curing time depends on the coating system, temperature and humidity. Epoxy systems typically cure in 24–36 hours. Polyurethane systems may take 36–48 hours. Using the bath before the coating has fully cured will damage the finish and void the warranty. Your specialist will advise the specific curing time for the product system used.
Bath Resurfacing Providers and Comparisons
Compare bath resurfacing companies across Australia before requesting quotes.
Bath Resurfacing Providers Australia
Compare price ranges, service areas, specialisations and coating systems for bath resurfacing companies across Australia.
View providers →Bath Resurfacing Comparisons
Side-by-side comparisons of bath resurfacing options — resurfacing vs replacement, epoxy vs acrylic liner, DIY vs professional and more.
Compare options →