Antenna Installation Prices
$150–$600
Typical range · Updated March 2026
Real pricing for digital TV antennas, signal boosters, satellite dishes and antenna repairs across Australia, UK, USA, Canada and New Zealand.
Price Calculator
Get an instant estimate for your antenna-installation
Build a quote-ready scope with live inputs, then use the result to screen weak provider quotes before you enquire.
Current selection
Digital TV Antenna (Standard)
National Average
Scope mix
Baseline scope
Number of TV Points: 2 points
Live estimate
$345
Typical quote target updates instantly.
Next step
Get Quotes
Use the range below to screen provider quotes fast.
How many TV outlets need to be connected to the antenna system. More points require more cabling and a stronger signal distribution setup.
8 inputs applied
Estimated project cost
$180 – $622
Typical quote target: $345
Based on digital tv antenna (standard) pricing in National Average. Adjust any field below to tighten the range for your job.
Selection
Digital TV Antenna (Standard)
National Average
Budget signal
$345
Use the midpoint as the first filter when quotes come back.
Quote pressure
Baseline scope
More inputs away from the default mix usually push the final quote upward.
Range shape
Wide range
$442 spread across current assumptions.
Planning depth
High-detail setup
More matched inputs usually means less pricing drift.
Next move
Get Quotes
Compare written inclusions against the midpoint, not only the headline total.
Share this estimate
Copy a link with your live calculator inputs so you can send the exact scope to a partner or keep it for later.
Adds your calculator inputs to the URL.
Project assumptions
Quote checklist
Confirm whether the quoted price includes the antenna unit itself or just the installation labour.
Ask if a masthead amplifier or signal booster is included for homes with multiple TV points.
Check whether new cabling is included or whether the installer plans to reuse existing coaxial runs.
Low end
$180
Straightforward job, standard access, common materials.
Likely average
$345
A realistic planning number for a professional install.
Average per unit
$173
Roughly $173 per points before quote-specific adjustments.
Ready to compare live quotes?
Use this range to reject weak quotes fast, then check written inclusions before you book.
ProviderCompare
Compare antenna installers before you start requesting quotes
Separate national franchise operators, specialist signal troubleshooters and budget-friendly local installers before you book site visits.
ProviderCompare
Compare Providers
Compare the same card structure every time: logo placeholder, star rating, price range badge, pros, cons, and the quote CTA.
Shared services
3
Comparable price lines side by side.
Coverage gap
2 areas
Difference in listed service footprint.
Rating gap
0.2
Headline review spread between both brands.
Lower Typical Price
Jim's Antennas
Avg $291, about $7 below the alternative.
Higher Rated
Jim's Antennas
4.3/5 overall rating with homeowners wanting a nationally trusted brand with wide coverage, same-day availability and straightforward digital tv antenna installation. positioning.
Jim's Antennas
Melbourne, VIC
Star rating
At a glance
Jim's Antennas
Best for homeowners wanting a nationally trusted brand with wide coverage, same-day availability and straightforward digital tv antenna installation. with coverage across 8 listed areas.
Price range badge
$80-$750
Budget range
Typical quote
$291
Star rating
4.3/5
Coverage
8 areas
Best for
Homeowners wanting a nationally trusted brand with wide coverage, same-day availability and straightforward digital TV antenna installation.
Service footprint
Pros
Cons
Next step
Get a written quote for the same scope
Mr Antenna
Brisbane, QLD
Star rating
At a glance
Mr Antenna
Best for homeowners in signal-challenged areas who need specialist troubleshooting alongside standard antenna installation. with coverage across 6 listed areas.
Price range badge
$120-$700
Budget range
Typical quote
$298
Star rating
4.1/5
Coverage
6 areas
Best for
Homeowners in signal-challenged areas who need specialist troubleshooting alongside standard antenna installation.
Service footprint
Pros
Cons
Next step
Get a written quote for the same scope
| Service | Jim's | Mr |
|---|---|---|
| Digital TV Antenna Install | $260 | $250 |
| Antenna Replacement | $280 | $275 |
| Whole-House Antenna Upgrade | $500 | $480 |
Service Areas
8 locations
Sydney, Melbourne, Brisbane
Service Areas
6 locations
Sydney, Melbourne, Brisbane
Best For
Homeowners wanting a nationally trusted brand with wide coverage, same-day availability and straightforward digital TV antenna installation.
Best For
Homeowners in signal-challenged areas who need specialist troubleshooting alongside standard antenna installation.
Choose Your Country
Select a country to see detailed antenna installation pricing by city
Australia
antenna installation / TV antenna
From $80/job
8 service types · 5 cities with data
8 regions covered
View Australia prices →
United Kingdom
aerial installation / TV aerial
From £40/job
12 service types · 4 cities with data
4 regions covered
View United Kingdom prices →
United States
antenna installation / TV antenna
From $50/job
12 service types · 4 cities with data
12 regions covered
View United States prices →
Canada
antenna installation / TV antenna
From C$55/job
12 service types · 4 cities with data
6 regions covered
View Canada prices →
New Zealand
aerial installation / TV aerial
From NZ$60/job
12 service types · 4 cities with data
5 regions covered
View New Zealand prices →
Antenna Installation Prices by Service — Australia
National average prices including GST — standard residential jobs
| Service | From | Average | Up to |
|---|---|---|---|
| 📡Outdoor TV Antenna Install Standard outdoor roof or wall-mount antenna installation for a single-storey home with basic access and one connected TV point. | $150/job | $355/job | $700/job |
| 🏠Digital Rooftop Antenna Install Digital rooftop antenna installation where reception quality or upgraded hardware is the main requirement. | $250/job | $365/job | $500/job |
| 📶High-Gain Antenna Install High-gain antenna installation for fringe reception areas, hilly suburbs, or sites needing stronger directional hardware. | $350/job | $450/job | $550/job |
| 🔄Antenna Replacement Removal of an old or failed antenna and replacement with a new digital antenna, typically reusing part of the existing setup where possible. | $200/job | $415/job | $700/job |
| 🔌Additional TV Point Installation Installation of an extra antenna wall point with cable run from the splitter or existing system to a new room. | $80/point | $250/point | $500/point |
| ⚡Signal Booster / Amplifier Install Supply and installation of a signal booster or amplifier to stabilise weak reception or support multiple TV points. | $150/job | $225/job | $300/job |
| 🔧Antenna Repair / Diagnosis Fault finding, reattachment, realignment, or repair of damaged antenna components, brackets, or cabling. | $95/job | $255/job | $550/job |
| 🗑️Old Antenna Removal Removal and disposal of an old roof antenna where replacement is not bundled into the same quoted package. | $80/job | $115/job | $150/job |
Prices include GST. Based on verified installer data. Last updated March 2026.
Common Antenna Installation Jobs and What They Usually Cost
Real job costs for typical Australian homes — complete project pricing.
| Job | Typical scope | Typical price | On-site time |
|---|---|---|---|
| Outdoor TV antenna install | New outdoor antenna on a standard roof or wall mount with one connected TV point | $150-$700 | 1-2 hours |
| Digital rooftop antenna install | Digital rooftop antenna job where upgraded reception hardware or harder access is part of the scope | $250-$500 | 1-2 hours |
| High-gain fringe-area install | Directional high-gain antenna setup for weak-signal suburbs, hills or fringe coverage areas | $350-$550 | 2-4 hours |
| Antenna replacement | Remove an old or failed antenna and fit a new digital replacement | $200-$700 | 1-2 hours |
| Additional TV point | Run new coaxial cable from splitter to a new TV outlet location | $80-$500 | 30-90 minutes |
| Signal booster / amplifier install | Install a booster or amplifier to support weak reception or multiple outlets | $150-$300 | 30-90 minutes |
| Old antenna removal | Remove and dispose of an old roof antenna where replacement is not bundled | $80-$150 | 30-60 minutes |
| Antenna repair / diagnosis | Diagnose signal loss, realign or reattach hardware, and repair damaged components or cabling | $95-$550 | 30-90 minutes |
Antenna Installation Budget Tiers
Use these bands to decide whether a quote is a simple fix, a normal whole-home job, or a genuinely complex signal project.
Budget fix
$80-$300
Single-room reception problems, outlet additions, basic repairs
This is the leanest end of the market: one extra TV point, a connector replacement, re-pointing an existing antenna, or a straightforward masthead amplifier install in a home with decent existing cabling. Quotes in this band should still include signal testing, otherwise the low price can become a repeat visit.
Typical family-home install
$150-$500
Most detached houses replacing or upgrading the main antenna system
Most homeowners land here. It covers a new digital antenna or replacement antenna, standard roof access, one to three outlets, and modest cabling work. If your property has patchy reception, a tile roof, or multiple TVs, this is the price range that usually produces a stable long-term setup rather than a bare-minimum install.
Complex or whole-home setup
$350-$700
Large homes, difficult roofs, commercial systems, or fringe-signal sites
Premium pricing normally means genuine complexity rather than installer padding: multi-storey access, weak-signal suburbs needing high-gain hardware, full recabling, integrated splitters and amplifiers, or shared systems for units and mixed-use properties. The right comparison here is scope quality and signal reliability, not just the day-one labour charge.
What Affects the Price of Antenna Installation?
Roof type and access difficulty
Single-storey homes with standard tile or metal roofs are the cheapest to install on. Steep tile roofs, multi-storey properties, slate roofs and heritage buildings all require extra safety equipment and time. Wall-mount installations avoid roof access entirely but may receive weaker signal.
Signal strength and location
Properties close to transmitters with clear line of sight receive strong signal with a standard antenna. Fringe reception areas, valleys, behind hills or surrounded by tall buildings may need a larger antenna, masthead amplifier or signal booster — all of which add cost.
Number of TV points and cabling
A single TV point is the base cost. Each additional point requires a cable run, splitter connection and potentially a distribution amplifier. Whole-house upgrades with 4+ points and new cabling are the most expensive residential jobs.
Existing infrastructure condition
New builds with pre-wired coaxial cabling are cheaper to install. Older homes with degraded analog-era cabling, corroded connectors or no existing infrastructure require more labour and materials.
Antenna type and mounting method
Standard digital TV antennas are the most affordable. High-gain directional antennas for weak signal areas cost more. Satellite dishes add alignment complexity. Commercial multi-dwelling systems require design, larger equipment and longer installation time.
Timing and urgency
Flexible weekday bookings are cheapest. Same-day, priority and weekend installations attract a premium. Storm-damage repairs during peak demand periods can also push pricing higher.
DIY vs Professional Antenna Installation
Know what you can tackle yourself and what needs a professional installer
| Task | DIY feasibility | Pro price | Verdict |
|---|---|---|---|
| Indoor antenna setup | Simple plug-and-play for strong signal areas — no tools needed. | $0 (self-install) | DIY possible |
| Roof-mounted antenna install | Requires roof access, safety equipment, antenna alignment and cabling. Falls from roofs cause serious injuries. | $150-$700/job | Professional recommended |
| Signal troubleshooting | Difficult without a signal meter. Trial-and-error re-pointing wastes time. | $95-$550/job | Professional recommended |
| Multi-point cabling | Requires knowledge of splitters, amplifiers and impedance matching. Poor DIY cabling causes signal loss. | $80-$500/point | Professional only |
| Satellite dish alignment | Requires precise azimuth and elevation angles plus a satellite finder meter. A few degrees off means no signal at all. | $350-$550/job | Professional only |
| Whole-house upgrade (4+ points) | Involves running cable through walls, ceiling cavities and potentially under the house. Requires distribution amplifier sizing and splitter configuration. | $250-$550/job | Professional only |
What Is Usually Included?
- Site assessment to determine best antenna type, mounting position and signal direction
- Supply and installation of the antenna unit on roof or wall mount
- Basic coaxial cabling from antenna to the agreed TV point(s)
- Signal testing and channel tuning at completion
- Removal and disposal of old antenna (on replacement jobs)
What Often Costs Extra?
- Masthead amplifier or distribution amplifier for multi-point installations
- Additional TV points beyond the quoted scope — each requires a separate cable run
- New cabling throughout the home when existing coaxial is degraded or incompatible
- Difficult roof access equipment, cherry picker or scaffolding for multi-storey homes
- Weekend, urgent or after-hours call-out surcharges
Signs Your Antenna Needs Attention
Pixelated or breaking up picture
Pixelation is the most common sign of a weak or degraded signal. It can be caused by a misaligned antenna, damaged cable, corroded connectors or nearby interference. A professional signal test identifies the root cause quickly.
Channels dropping out intermittently
Channels that come and go suggest marginal signal strength. This often worsens in bad weather. A masthead amplifier or antenna re-pointing usually resolves intermittent reception.
Old analog-era antenna still on the roof
Analog antennas are not optimised for digital frequencies. Replacing an old analog antenna with a modern digital antenna typically delivers a dramatic improvement in channel count and picture quality.
Visible corrosion or storm damage
Corroded brackets, bent elements, damaged cable and loose mounting indicate an antenna that needs replacement or repair. Leaving damaged antennas on the roof risks further roof damage in storms.
No signal on some or all channels
Complete signal loss usually means a cable break, connector failure, or the antenna has been knocked out of alignment by wind or storm damage. Professional diagnosis is faster than trial-and-error troubleshooting.
Choosing the Right Antenna Type
The antenna type drives both cost and long-term reception quality — here is what each option is designed for.
Standard UHF digital antenna
$150-$700The workhorse of Australian residential TV reception. Compact enough for a standard roof mount, picks up all free-to-air digital channels in areas with reasonable signal strength. This is what most installers will recommend for a typical suburban home.
High-gain directional antenna
$350-$550Larger physical size with more elements, designed to pull in weaker signals from a specific direction. Essential for properties 50+ km from a transmitter, in valleys, or behind hills. Requires precise alignment — even a few degrees off target degrades reception significantly.
Phased-array antenna
$250-$550Combines multiple antenna elements pointing in different directions. Used where some channels come from one transmitter and others from a different direction. More expensive than a single directional antenna but avoids needing two separate antennas and a combiner.
Signal booster / masthead amplifier
$150-$300Not an antenna type per se, but a critical add-on. Amplifies the signal before it reaches the splitter, compensating for loss across long cable runs and multiple outlets. Overamplification in strong signal areas can actually cause problems — a good installer tests before adding one.
Satellite dish (VAST/Foxtel)
$350-$700Required for VAST (Viewer Access Satellite Television) in remote and regional areas where terrestrial signal does not reach. Also used for Foxtel satellite. Requires precise south-facing alignment and clear sky view — trees and buildings in the signal path cause dropout.
How to Save on Antenna Installation
- 1
Bundle a new antenna install with additional TV points and cabling in one visit instead of booking separate jobs.
- 2
Get three quotes that specify the antenna model, amplifier inclusion, number of cable runs and mounting method so you compare like-for-like.
- 3
Ask whether a signal booster or masthead amplifier is genuinely needed — in strong signal areas, a standard antenna without amplification is often sufficient.
- 4
Check whether your existing coaxial cabling can be reused before agreeing to a full re-cable — RG6 quad-shield cable from the last 10-15 years is usually fine.
- 5
Book flexible weekday appointments rather than weekend or urgent same-day slots to avoid premium call-out rates.
- 6
Consider a wall-mount installation if you have a flat or difficult roof — wall mounts are often cheaper and easier to maintain.
Best Time to Book Antenna Installation
After storms or high winds
Strong winds and storms are the number one cause of antenna misalignment and damage. If your picture quality drops after severe weather, book an inspection before the damage worsens or water enters through damaged cable entry points.
Before major sporting events
Demand for antenna installations and repairs spikes before major sporting events like the AFL Grand Final, NRL Grand Final, and cricket season. Book well ahead if you want reliable free-to-air reception for big events.
When moving into a new home
The best time to install or upgrade an antenna is during the moving-in period when trades are already on site. Bundling antenna work with other electrical or data cabling work saves on call-out costs.
Off-peak weekdays
Flexible weekday bookings avoid the premium pricing of weekend and urgent call-outs. Most installers offer same-day or next-day availability during quieter periods.
Antenna Installation Price Trends — Australia
How antenna installation costs have changed over the last 3 years and what to expect in 2026–2027.
| Year | Standard Install | Replacement | Signal Booster | High-Gain | Extra Point | Repair | Removal | Satellite | YoY Change |
|---|---|---|---|---|---|---|---|---|---|
| 2023 | $250–$400 | $200–$350 | $120–$250 | $350–$550 | $80–$150 | $100–$200 | $80–$150 | $400–$650 | — |
| 2024 | $260–$420 | $210–$370 | $130–$260 | $360–$570 | $85–$160 | $110–$210 | $85–$160 | $420–$680 | +3–5% |
| 2025 | $270–$430 | $220–$380 | $140–$270 | $380–$590 | $90–$170 | $115–$220 | $90–$165 | $440–$700 | +3–4% |
| 2026 | $280–$450 | $230–$400 | $150–$280 | $400–$620 | $95–$180 | $120–$230 | $95–$170 | $460–$730 | +2–4% |
2026–2027 Outlook
Antenna installation prices are expected to rise 2–4% through 2027, driven by steady trade wage growth and copper/aluminium material costs. The shift from analog to digital is largely complete, so demand is now driven by replacement cycles, storm damage repairs and streaming-era households rediscovering free-to-air TV. High-gain and amplified installs may see slightly sharper price increases as fringe-area demand grows with new housing developments on city edges. Booking flexible weekday appointments remains the best way to minimise costs.
City-by-City Antenna Installation Pricing — Australia
How standard antenna installation costs vary across the five major capital cities and why.
Sydney
$300–$470Higher end due to multi-storey terrace access in inner suburbs. Western Sydney fringe areas often need high-gain antennas due to distance from transmitters at Gore Hill and Kings Cross.
Melbourne
$280–$450Competitive market keeps prices moderate. Tile roofs dominate, which are straightforward for mounting. Signal is generally strong across metro Melbourne from Mt Dandenong transmitter.
Brisbane
$270–$430Slightly lower labour costs than Sydney/Melbourne. Hilly terrain in western suburbs (The Gap, Bardon, Kenmore) can require high-gain antennas. Storm damage repairs spike during summer storm season.
Adelaide
$260–$420Most affordable capital city for antenna work. Flat terrain and good transmitter coverage mean most homes get strong signal with a standard antenna. Hills suburbs around Stirling may need directional antennas.
Perth
$270–$440Large sprawl means northern suburbs like Joondalup and southern suburbs like Rockingham can be marginal signal areas. New developments often lack pre-wired cabling, adding to install cost.
Hobart
$260–$430Smaller market with fewer specialist installers. Hilly terrain around Mt Wellington creates signal shadows in suburbs like South Hobart and Fern Tree that need high-gain setups. Heritage homes in Battery Point and Sandy Bay may restrict external mounting options.
Canberra
$270–$440Strong signal coverage across most of the ACT from Black Mountain transmitter. Northern suburbs like Gungahlin and new developments in Molonglo Valley sometimes lack pre-wired cabling. Cold winters mean fewer installers want to work on roofs in June–August, so summer bookings get better availability.
Ranges are for a standard outdoor antenna install on a single-storey home with one TV point. Prices higher for multi-storey, difficult access or fringe signal areas.
Red Flags When Hiring an Antenna Installer
Watch for these warning signs before you pay a deposit or agree to a quote.
No site assessment before quoting
A credible installer checks your signal strength, roof type and cabling before giving a final price. A flat-rate phone quote without a site visit often leads to surprise extras on the day — especially for access difficulty, amplification needs or cabling replacement.
Pressure to upgrade to unnecessary equipment
Some installers push expensive high-gain antennas, unnecessary amplifiers or premium cabling in strong signal areas where a standard setup works perfectly. If the installer cannot explain why the upgrade is needed with signal meter readings, question it.
No signal test at completion
Every professional install should end with a signal strength and quality test at each connected TV point. Installers who leave without testing are cutting corners — poor signal quality shows up as intermittent pixelation weeks later.
Unlicensed or uninsured operator
In Australia, antenna installation involving roof work should be performed by a licensed cabler (open registration through the ACMA). Ask to see their registration number. Unregistered installers may void your home insurance if they cause roof damage.
Drastically below-market pricing
If a quote comes in well below $150-$700 for a standard install, check what is being left out. Common shortcuts include reusing degraded cabling, skipping amplification on multi-point installs, or not sealing roof penetrations against water ingress.
Cash-only with no written quote
Legitimate businesses provide a written quote specifying the antenna model, amplifier inclusion, number of cable runs and mounting method. Cash-only operators with no paperwork make warranty claims and dispute resolution nearly impossible.
What to Expect During Antenna Installation
A step-by-step guide to what happens when an installer arrives.
1. Site assessment
The installer checks signal strength at your address using a signal meter, inspects your roof type and access, and assesses existing cabling. This determines the best antenna type, mounting position and whether amplification is needed.
2. Antenna selection and positioning
Based on signal readings, the installer selects the correct antenna — standard digital, high-gain directional, or phased array — and identifies the optimal mounting point. Roof-mount gives the best elevation; wall-mount avoids roof penetration but may receive weaker signal.
3. Mounting and cabling
The antenna is secured to a mast on the roof or a wall bracket. New RG6 quad-shield coaxial cable is run from the antenna to a splitter or directly to the TV point. On replacement jobs, the old antenna and any corroded cabling are removed first.
4. Signal testing and tuning
The installer runs a full channel scan at each TV point, checking signal strength and quality readings. If any channels are marginal, the antenna direction is fine-tuned and amplification is added where needed.
5. Clean-up and handover
Cable entry points are sealed against water ingress, mounting hardware is tightened to withstand wind loads, and the work area is cleaned. The installer runs through the channel list with you and explains any ongoing maintenance needs.
State-by-State Antenna Installer Licensing — Australia
All antenna installers must hold ACMA Open Cabling Registration. Some states have additional electrical licensing requirements.
| State | Licensing Body | Requirements |
|---|---|---|
| NSW | ACMA (federal) | Open Cabling Registration via ACMA required for all antenna and cabling work. No separate state licence, but electrical work beyond low-voltage cabling requires a NSW electrical licence from Fair Trading. |
| VIC | ACMA + Energy Safe Victoria | ACMA Open Cabling Registration for antenna and coaxial work. If the install involves mains-powered amplifiers or electrical connections, a Victorian electrical licence (REC) is required. Energy Safe Victoria can audit compliance. |
| QLD | ACMA + Electrical Safety Office | ACMA registration covers antenna and cabling. Electrical Safety Office requires a restricted electrical licence for any mains electrical connection work. QBCC licence may apply for jobs over $3,300 inc GST. |
| SA | ACMA + OTR | ACMA registration is the primary requirement. Office of the Technical Regulator (OTR) oversees electrical safety. No separate SA antenna licence, but installers doing electrical work need a PGE-licence. |
| WA | ACMA + Building and Energy | ACMA Open Cabling Registration required. WA Department of Mines, Industry Regulation and Safety (Building and Energy) regulates electrical work. Installers connecting mains-powered equipment need an electrical licence. |
| TAS | ACMA + CBOS | ACMA registration covers cabling work. Consumer, Building and Occupational Services (CBOS) regulates electrical licensing in Tasmania. Roof work on commercial buildings may require additional work-at-height certification. |
How to Hire an Antenna Installer
Follow these steps to find a qualified, insured installer and avoid common pitfalls.
Check ACMA registration
All antenna installers in Australia must hold an Open Cabling Registration through the Australian Communications and Media Authority (ACMA). Ask for the registration number and verify it on the ACMA cabling register before work begins.
Get 3 written quotes
Each quote should specify the antenna model, amplifier inclusion (yes/no), number of cable runs, mounting method (roof or wall), and whether old antenna removal is included. This lets you compare like-for-like rather than just the bottom-line number.
Ask about warranty
Reputable installers offer a workmanship warranty (typically 1–5 years) separate from the manufacturer warranty on the antenna hardware. Get the warranty terms in writing before work starts.
Confirm insurance
The installer should carry public liability insurance (minimum $5M is standard) and workers compensation if they have employees. This protects you if they damage your roof or injure themselves on your property.
Check reviews and referrals
Look for installers with consistent positive reviews on Google Business, ProductReview.com.au or local community groups. A single glowing testimonial on a website is not enough — look for volume and consistency across independent platforms.
Agree on signal testing
Before signing off on the job, confirm the installer will perform a signal strength and quality test at every connected TV point and provide you with the readings. This is your proof the install meets acceptable reception standards.
Current Australian source data reviewed on 24 March 2026 puts a standard outdoor antenna install at $150-$700, digital rooftop jobs at $250-$500, antenna replacement at $200-$700, and extra TV points at $80-$500 per point.
If you have an old analog antenna, upgrading to a modern digital antenna usually delivers better signal quality and more channels. Modern UHF/VHF antennas are designed for digital frequencies and provide stronger, more reliable reception than older analog-era antennas.
Common signs include pixelated picture, channels dropping out, poor signal in bad weather, visible corrosion or storm damage on the antenna, or complete signal loss on some channels. If your antenna is more than 15-20 years old, replacement with a modern digital antenna is usually worthwhile.
Signal breakup (pixelation) is caused by weak signal reaching the TV. Common causes include misaligned antenna, damaged coaxial cable, corroded connectors, signal splitting without amplification, or interference from nearby structures or trees. A professional signal test identifies the specific cause.
Indoor antennas are simple self-install. Roof-mounted antenna installation is not recommended as a DIY job because it involves working at height (falls from roofs cause serious injuries), requires a signal meter for correct alignment, and poor installation causes ongoing reception problems. Professional installation is safer and more reliable.
A straightforward outdoor or replacement install usually takes 1-2 hours. Extra TV points and repair visits often take 30-90 minutes. High-gain installs or more difficult rooftop jobs can stretch to 2-4 hours once access, signal testing and hardware setup are included.
Antenna installation costs have risen 2-4% year-on-year since 2023, driven by trade wage growth and material costs. For 2026-2027, expect similar modest increases. Standard installs now typically cost $280-$450 in Australia compared to $250-$400 in 2023. Booking flexible weekday appointments and bundling multiple TV points in one visit helps offset price rises.
Many households are returning to free-to-air TV to complement streaming subscriptions. A one-time antenna installation gives permanent access to local channels, news, sport and emergency broadcasts without ongoing subscription costs. In areas with good signal, a $280-$450 install pays for itself within months compared to adding another streaming subscription.
UHF (Ultra High Frequency) antennas receive channels broadcast on bands 28-69, which is where most Australian digital TV channels now sit. VHF (Very High Frequency) antennas receive channels on bands 6-12, used by some regional transmitters. Most metro areas only need a UHF antenna. Combined UHF/VHF antennas are available for areas that need both, but they are slightly more expensive and larger.
No — TV antennas and internet connections are completely separate systems. A TV antenna receives broadcast television signals only. If you have poor internet, you need to speak to your ISP or consider upgrading your NBN plan. Some installers also do data cabling and Wi-Fi optimisation, so it can be worth asking while they are on site if you need both services.
Yes. All antenna and cabling installers in Australia must hold an Open Cabling Registration through the Australian Communications and Media Authority (ACMA). If the work involves mains electrical connections, they also need the relevant state electrical licence. Ask for the ACMA registration number and verify it before work begins — unregistered installers may void your home insurance if they cause damage.
A quality digital TV antenna typically lasts 10–15 years in most Australian conditions. Coastal properties with salt air exposure may see faster corrosion (7–10 years). Antennas in storm-prone areas like South East Queensland may need earlier replacement due to wind damage. If your antenna is more than 10 years old and you are experiencing reception issues, replacement is usually more cost-effective than repeated repairs.
Get a quote
Fill in your details and copy the template — then paste it into an email to any provider.
Hi, I'm looking for a quote for Antenna Installation in [your suburb]. I've seen typical prices around $150–$500 — please let me know if your quote is in that range. Please reply to this email or call me to discuss. Thanks, [your name]
Find providers on hipages, Airtasker, or Google “Antenna Installation near me” to get their email.
How We Get These Prices
- • We compare residential antenna installation quotes by service type, roof difficulty, signal conditions and number of TV points.
- • We normalise pricing to a per-job basis for standard residential tasks and cross-check against completed-job totals from verified installers.
- • We separate antenna type, amplifier inclusion, cabling scope and access difficulty because those cost layers move independently.
- • We review city-level differences through labour markets, signal coverage maps and roof type prevalence.
- • We refresh ranges when new installer data shows a consistent market move rather than a one-off promotional price.
Related Services
Compare prices for other home services